On this page
Mounting a 75 or 85-inch TV is a different job than mounting a 55 or 65. These TVs weigh 60 to 130 pounds, require dual-stud mounting at minimum, and need two people to lift into place. The mount has to be heavy-duty, the wall has to be solid, and the hardware has to be right.
We install large-format TVs in living rooms, home theaters, and media rooms across NYC. The most common issue is not the mount itself — it is the wall. NYC apartments have every wall type imaginable, and a 90-pound TV on a full-motion arm creates serious forces that plaster, metal studs, or thin drywall may not handle without reinforcement.
The mounts in this guide are rated for 132 to 275 pounds, support VESA patterns up to 600x400mm and 800x400mm, and are built with heavy-gauge steel. These are not bargain-bin mounts — for a TV this size, the mount is not the place to save money.
What owners on Reddit say
"My company installs TVs as part of our service. I can tell you that a good full motion mount (especially for a big TV) costs a lot more than you'd think. Cheap mounts will never be level, they will need constant adjustment." — one installer, r/hometheater (thread)
"I've got a Perlegear mount holding my 85". The first one looks useful over a fireplace, but for a regular wall I prefer the extra weight capacity and wider swivel, and mine wasn't hard to install." — one owner, r/hometheater (thread)
"I got one that swings and tilts and I strongly advise against it, especially the tilting part." — one owner, r/hometheater (thread)
A big TV on a moving arm is harder to keep level. If you watch from one seat, a tilt or fixed mount is often the better fit.
Buying guide
Weight capacity — 75-inch TVs weigh 60 to 100 pounds. 85-inch TVs weigh 90 to 130 pounds. Choose a mount rated for at least 150 pounds for a 75-inch TV and 200 pounds for an 85-inch TV. The safety margin matters because dynamic forces from swiveling or accidental bumps add load.
VESA pattern — Most 75-inch TVs use 600x400mm VESA. Some 85-inch models need 800x400mm or even 900x600mm. Verify your TV's VESA pattern before buying. A mismatch means the mount will not work at all.
Dual-stud requirement — Every 75 and 85-inch TV installation must go into at least two wall studs, no exceptions. The wall plate should span at least 16 inches to catch two studs at standard spacing. Some heavy-duty mounts span 24 inches for three-stud mounting.
Lag bolt specs — For TVs this size, we use 3/8-inch by 3.5-inch lag bolts at minimum, with at least 6 bolts total. Standard mount hardware often includes bolts that are too short. Longer bolts anchored deep into studs are what keep a 100-pound TV on the wall.
Two-person lift — There is no safe way to hang an 85-inch TV by yourself. The panel is wide enough that it is unwieldy even for two experienced installers. Plan for at least two adults during installation.
NYC tips
Prewar buildings with plaster-over-lath construction need special attention for large TVs. The plaster layer is typically 3/4 to 1 inch thick over wood lath strips, and your lag bolts need to pass through all of that and still sink 2 or more inches into the stud behind it. Standard-length hardware is almost never long enough.
Metal studs in newer NYC buildings and renovated units are a real concern for 75 and 85-inch TVs. Metal studs are thinner gauge steel and flex under heavy loads. We install plywood backers or use specialized heavy-duty toggle bolts designed for metal stud construction.
Concrete walls in NYC high-rises can actually be ideal for large TVs because concrete is incredibly strong. But you need a hammer drill, masonry bits, and concrete sleeve anchors. Regular drill bits and plastic anchors will not work.
Delivery logistics — getting an 85-inch TV into a NYC apartment often means navigating narrow hallways, small elevators, and tight stairwells. We recommend measuring every doorway and hallway before purchasing. We have had jobs where the TV physically could not fit through the apartment door.
FAQ
Can I mount an 85-inch TV on drywall?
Only if the drywall is over solid wood studs and you anchor directly into those studs. Drywall itself cannot support the weight. For an 85-inch TV weighing 90 to 130 pounds, you need at least two studs and heavy-duty lag bolts. We never rely on drywall anchors alone for a TV this size.
What is the best mount type for a 75-inch TV?
For most living rooms, a heavy-duty tilt mount offers the best combination of stability and clean appearance. If you need to swivel the TV or have a corner setup, a full-motion mount rated for 150 pounds or more works well. Fixed mounts are the most stable option if the TV is at perfect eye level.
How many people does it take to mount an 85-inch TV?
At minimum two adults, and we often use three for 85-inch installations. The TV panel alone can weigh over 100 pounds and is nearly 6 feet wide. Lifting it overhead and aligning the VESA bolts requires coordination and strength. This is not a solo project.
Do I need a special mount for a TV over 75 inches?
Yes. You need a mount that supports VESA patterns of 600x400mm or larger and is rated for the weight of your specific TV plus a safety margin. Standard mounts that go up to 65 inches will not have the right VESA pattern or weight rating. Look for mounts specifically listed for 75 to 90 inch TVs.
Get it mounted right
Large-format TVs need dual-stud anchoring and hardware sized for the load — not a job for standard mount kits. Our team handles 75 and 85-inch installations two-person, every time. Book your TV mounting.
See our tilt mount guide, full-motion mount guide, 65-inch TV mount picks, or brick and concrete wall mounting. For a personalized pick, try our equipment recommendation tool, or browse large-screen TVs.
